What To Do Before Using Band-Aid?

The skin is a little bit hurt, and many people will stick the band-aid directly on the wound. This is not right! Because the injured part is likely to have been contaminated or has foreign objects, it must be processed before it can be posted:

1. Rinse the wound with saline or water;

2. Gently remove dirt or foreign matter from the surface of the wound;

3, wipe the wound with cotton ball iodine or 75% alcohol, the scope of the wipe is the center of the wound, to the outer edge of the wound 3 to 5 cm;

4, the wound is slightly dry and then bandaged with a band-aid.

Note: Do not apply red syrup or purple syrup to the wound; after removing the band-aid surface paper, do not touch the absorbent pad with your fingers to avoid contaminating the absorbent pad.