Instructions for use of disposable infusion heating bags.

  Sep 02, 2018

  Leave a message

 

Introduction of infusion heating bag:

Infusion is quite extensive in clinical treatment. During the infusion process, a large amount of liquid medicine enters the human blood vessels directly from the outside through the infusion set. Due to the low temperature of the drug solution, the patient's limbs are often chilly, and even numbness and pain. In severe cases, blood vessels and other symptoms may occur, especially in spring, autumn and winter. The use of a one-time infusion heating bag can solve the problem that the patient feels uncomfortable due to the low temperature of the liquid medicine. The product has stable output heat, convenient movement and automatic heating. The effective temperature can last for more than 4 hours, and it is convenient to use and safe. Reliable, no odor, no side effects.

Performance characteristics:

After opening the package, the air is automatically heated, automatically tempered, and can be kept at a constant temperature for about three hours. When the temperature is not lower than 50 ° C in the built-in working state, when the infusion speed is about 4 ml / min, and the ambient temperature is 5 ° C - 10 ° C, the temperature of the discharged liquid is not lower than 12 ° C after heating; when the ambient temperature is When the temperature is between 15 ° C and 20 ° C, the temperature of the liquid medicine is not higher than 30 ° C.

Use range:

A disposable infusion heating bag for warming the administration solution during clinical infusion, or for warming and hot compressing.

Instructions:

1. Check whether the small package is leaking or not, and if there is no shelf life, if it is not, open the small package and take out the warmer, so that the heat bag is in contact with the air through the air hole.

2. The adhesive tape protective film attached to the right side of the warmer is torn off, and then the warmer is folded in half, and the infusion set hose is fixed in the middle of the warmer, so that the adhesive tape of the protective film is torn off on the right side. Bonded on the left side.

3. If the room temperature is between 15 °C and 20 °C, the warmer is closer to the dripper on the infusion set. If the room temperature is below 10 °C, the warmer is close to the infusion point.

Precautions:

1. At room temperature above 20 °C, do not use albumin.

2. During the infusion process, if the infusion is stopped for more than 2 minutes, please reinstall the product when the infusion is removed.

3. This product is a one-time use product, please destroy it after use.

4. Fast heating: 1 minute after tearing the package, 5 minutes to reach the temperature of the normal infusion - 60 degrees or more. It takes at least 10 minutes for the other to start to heat up, and 20 to 30 minutes to reach the normal use temperature.

5, waterless beads: no water droplets will overflow during use, and many other water droplets will overflow.

6. No expansion bag,

Storage:

After vacuum packaging, the product should be stored in a plot warehouse with a relative temperature not exceeding 80%, non-corrosive, and ventilated and dry. Shelf life: 24 months.


Send Inquiry
Send Inquiry
Hangzhou Demo Medical Technology Co., Ltd is a professional medical products designer, manufacturer and exporter in China.