The advantages are as follows:
1. Comfort and safety: The bandage has a small shrinkage after drying, and does not cause the discomfort of the skin to be tight and itchy after the plaster bandage has dried. There is also no discomfort in the patient's skin due to the heat-generating reaction during the hardening process of the gypsum during the hardening process.
2. Good breathability: The bandage uses high-quality raw yarn and has good gas permeability. It solves the long-term partial tube-wrapping and poor air permeability, such as hot flashes, itching and other discomfort, which is beneficial to skin metabolism.
3. Light weight and high hardness: The impact strength of the bandage after curing is 20 times that of the traditional plaster bandage. This feature plays a reliable fixing role after maintaining the correct reset. The fixing material is small and the quality is light. The polymer bandage is only 1/5 of the weight of the gypsum and 1/3 of the thickness. It can make the affected part have a small weight, which is conducive to local blood circulation, promote healing, minimize the burden of human activities, and will not cause inconvenience.
4. Excellent projection: the splint and bandage have excellent permeability to radiation, and the X-ray effect is clear, which can ensure the doctor's accurate grasp of the bone and bone healing of the affected part. It is not necessary to remove the bandage during the film inspection. Accurate surgery is beneficial to resetting and understanding healing.
5. Good water resistance: The bandage has good water resistance, which can block 85% of foreign water from infiltrating. After the affected part is exposed to water, it can effectively ensure the affected part is dry, easy to clean and care.
6. Convenient, flexible and good plasticity: When the fixed part has skin trauma or long operation time, it can be directly fixed without wet water. After fixing, water can be sprayed on the outer layer of the bag to accelerate the hardening speed. Good shape, high bending and tensile strength, can be bent at will, bandage can be made into tube type, bracket and splint. It is easy to operate, only needs normal temperature water, without any heating equipment, it can be fixed in a short time. Good shape and moderate elasticity.
7. Wide range of applications: orthopedic fixation, orthopedic orthopedics, prosthetic assistive devices, support tools, and local protective stents for burns.
8. Fast curing, curing starts in 2-3 minutes, hardens quickly, hardens in 3-5 minutes, and can bear weight after 20 minutes. By adjusting the water temperature, the hardening time can be adjusted, the water temperature is increased, the hardening time is short, the water temperature is lowered, and the hardening time is long. When the bandage is soaked, there is very little gypsum loss. Drying time is fast and completely dry within 36 hours. Adaptable, high temperature resistance (+40 ° C) and high cold (-40 ° C), non-toxic, non-irritating, non-allergic.
9. Environmental protection. It is moisture-resistant, moisture-resistant, non-toxic, non-irritating and fragrant after setting. After the cure, it is easily removed, cut with a special plaster saw, and the special plaster saw is hard to eat and not hurt the skin. Completely burned thoroughly to protect the environment
