1.product introduction of the disposable plastic syringe
Product Feature | |
1. Injection-tube size | 1ml 2ml 3ml 5:ml 10ml 20ml 30ml 50ml 60ml |
2. Sterilized | by EO gas, non-toxic, non-pyrogenic, for single use. |
3. Link | Luer slip or Luer lock connector |
4. Material | medical and high transparent PP material for tube and plunger |
5. Needle | With or without needle |
6. Hypodermic needle | 29G, 28G, 27G, 26G, 25G, 24G, 23G, 22G, 21G, 20G,18G,16G |
7. Material for gasket | Natural latex or Synthetic rubber(latex free). |
8. Print | Transparent casing for easy observance; strongly adhesive printing ink of the scale that will not fall off. |
9. Certificates | CE, ISO 13485 |
10. Structure | Unique anti-separate structure can prevent the core rod from accidental separation from the casing. |
11. Individual pack | PE or blister |
2.product specification of the disposable plastic syringe
OEM | Available |
SPEC | 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml |
Need Gauge | 16g-30g |
Structure | 2 part and 3 part |
Individual package | PE or Blister |
Connect Port | Luer Slip or Luer Lock |
Needle Position | Mounted needle or needle at side |
Sterile Methods | EO GAS |
Package | Depend on your requirement |
3.Product feature and application of the disposable plastic syringe
Product advantage
1. The tip sharp, no burr, defects such as hook
2. The cylinder good transparency, the line is clear, it is more convenient to observe.
3. The piston rubber wire, rubber crumbs, cooperate closely with coat, good sliding properties.

