1) Pressure dressing method: small trauma, capillary or venous bleeding, the outflowing blood is easy to condense, the wound is covered with disinfectant, and then bandaged with a bandage or bandage. (2) Finger pressure hemostasis: generally used for arterial hemostasis. That is, the proximal end of the bleeding artery is pressed with a finger to the opposite bone surface to block the blood source and achieve the purpose of temporary hemostasis. (3) Hemostasis hemorrhage in the extremities of the extremities. When it is not easy to stop bleeding with pressure bandage or finger pressure, a tourniquet (rubber band or other substitute) can be used to bind to the proximal end of the bleeding. Application of the tourniquet, can not be directly pressed on the skin, but first in the upper tourniquet area with a triangle towel, towel and other soft things padding, the injured limb is raised, and then tied with a tourniquet, its tightness can be pressed The arterial blood flow is the principle. After the binding, the limb color is suitable. If it is purple, it can suppress the arterial blood flow. If the upper limb should be every 20-30 minutes, if the lower limb should be every 45-60. Relax once in minutes. Anyone who has an episode after the hemostasis must record the location and time of the tourniquet and should promptly send it to the medical unit. 2, dressing and dressing to protect the wound, reduce the chance of infection, compression and hemostasis, fixed fractures and reduce the pain, is one of the main techniques of injury first aid. Commonly used materials for bandaging include bandages, bandages, and the like. If you do not have these materials on site, you can use towels, clothing, etc. instead. The dressing action should be skillful, soft and soft, and the elastic should be suitable. Here are several dressings for materials that use bandages or bandages: (1) Ring dressing is often used for dressing smaller parts of the limb or for the beginning and end of other dressings. Open the bandage roll when dressing, put the bandage on the injured limb, press it by hand, wrap the bandage around the limb for a week, then fold the lead and a small corner, then continue wrapping around the circle, the second circle covers the first Circle, bandage 3-4 rings. (2) Spiral bandage The bandage is wound obliquely, with each roll pressing one half or one third of the front. This method is mostly used in areas where the thickness of the limbs is not much different. (3) When the spiral dressing is performed by the reverse-folding spiral dressing method, the thumb is pressed against the top of the bandage, and the fold is reversed downward, and the half or one-third of the previous circle is pressed, which is mostly used for the larger part of the limb thickness. . (4) The "8" word bandaging method is mostly used for the bandage of joint parts. Start looping a few turns on the joint, then wrap the bandage obliquely, wrap the joint under the joint, and make two turns on the concave surface of the joint, repeating it, pressing each half of the previous half or one third.

