Medical Absorbent Cotton Industry Standard Medical

Apr 24, 2019

Leave a message

1, traits: soft and elastic white fiber, odorless and tasteless.

2. Whiteness: 80 degrees or more.

3. Soluble in water: It should be less than 0.5% in the test solution of 100ml.

4, pH: in the 100ml test solution, add phenolphthalein indicator is not pink, add bromocresol purple finger

The indicator should not be yellow.

5, easy to oxide: in the 40ml of the test solution to increase the acid test solution, the red is not complete within 5 minutes

Disappeared.

6, water absorption time: within 10 seconds.

7, water absorption: more than 23g per gram of water.

8. Soluble in ether: The residual residue in 100 ml of test solution should be less than 0.5%.

9. Fluorescent: Only micro-brown fluorescence and a few yellow particles are allowed under the ultraviolet lamp, except for a few

There is no strong blue fluorescence at the separable site.

10. Loss on drying (including moisture): should be less than 8%.

11. Residue on ignition: Take 2 grams of dry to constant weight, and the residual residue should not exceed 0.5%.

12. Surfactant: The surface active foam in the test solution shall not exceed 2mm (5 seconds

Lost).

13. Innocent supply implementation GB18278, GB18279, GB18280.

14, ethylene oxide residue: should be less than 10mg / kg.

Product quality is as simple as: (1) color (visual) (2) put cotton wool into water glass, calculate water absorption time (3) burn check whether cotton

Send Inquiry
Send Inquiry
Hangzhou Demo Medical Technology Co., Ltd is a professional medical products designer, manufacturer and exporter in China.