Suture diameter
The most basic principle of using sutures is to use sutures that are thin and have a large pulling force and minimal reaction to the tissue. The thickness of various sutures is indicated by the number and the zero number. The larger the number, the thicker the suture; the diameter of the suture is in millimeters, often expressed in several zeros. The finer the stitch, the more the number of 0. For example, six 0 nylon threads are thinner than four 0 nylon threads. But the actual thickness depends on the material of the suture. For example, the same five 0, the gut is thicker than the polypropylene synthetic line (ProleneTM). The principle of choice regarding the thickness is to select the smallest possible suture under conditions that can withstand the tension of the wound.
tensile strength
The US National Pharmacopoeia (USP) definition of tensile strength is the minimum force that can break a single suture. Therefore, tensile strength refers to a specific tension value, and a nonlinear interval. Effective tensile strength refers to the tensile strength of the stitch after winding or knotting. The tensile strength of the same type of suture after knotting is 1/3 of its unknotted. In general, the suture of the synthetic material has a higher tensile strength than the suture of the gut, and the suture of the tendon is stronger than the tensile strength of the synthetic suture.
structure
The structure refers to whether the suture is a single strand (monofilament) or a multi-strand (braided strand). Multi-strand sutures are woven. This suture is easy to handle but increases the chance of infection and tissue reaction. It is easy to cause infection because it has a siphon effect to infiltrate bacteria and foreign matter. Bacteria are hidden inside the braided wire to escape host macrophage phagocytosis. Therefore, monofilament threads (nylon or polypropylene) are more suitable for suturing contaminated wounds. However, the monofilament thread is not easy to handle.
Coefficient of friction
The coefficient of friction of the suture determines whether the suture is easily passed through the tissue. Sutures with low coefficient of friction (such as polypropylene sutures) can easily slide through the tissue and are often used for intradermal sutures. The lower the coefficient of friction, the smoother the stitching and the easier the knot will be loosened. Therefore, when using polypropylene sutures, it is often necessary to add a few knots.
Wire knot firmness
The knot strength refers to the minimum pulling force that loosens the knot and is proportional to the coefficient of friction of the stitch. The greater the knot strength, the less likely the wound will split. A suture knot with a high coefficient of friction has good firmness, but it has a large resistance when it passes through the skin and is difficult to use.
elasticity
Elasticity refers to the ability of a suture to return to its original length and shape after it has been swollen by the wound. A more flexible suture (such as NovafilTM polybutene ester synthetic line) is not easy to cut into the tissue when the tissue is edematous, and the edema does not loosen after the edema subsides, and the wound is not easily cracked.


