1. Impregnation: Dip a roll of product at 45 degrees into warm water until no continuous bubbles are produced.
2. Extrusion: Take out the product and squeeze it from both ends of the product to the middle with both hands.
3. Winding: The product is evenly wound around the affected part.
4. Leveling: When performing the dressing, it should be flattened by hand while wrapping.
Precautions
1. When the plaster bandage is impregnated, the water temperature must be 25 ° C - 30 ° C, and the immersion time is about 5-15 seconds.
2. The winding process of the plaster bandage must be completed within its curing time.
3. Store in a room with a relative humidity of no more than 80%, no corrosive gases and good ventilation.
